TIP: we strongly recommend to set up tags and verify tracking works well at home, before you head out to the golf course.
Make sure you have the latest version of Golf Pad app installed. TAGS are supported starting with Golf Pad version 12.0 and require iPhone 7 or later and iOS 12 or later. Click here to buy TAGS now.
Attach TAGS to your clubs
Attach TAGS to all clubs, including putter. Use a twisting motion to gently insert the post into the club grip. Do not over-tighten.
Tip: if you have particularly tight openings in the grips, use a tee to soften them up and/or add some water or lubricant when you put the tags in. If you have bigger than usual openings in the grips, thread some electrical tape for secure fit.
Start Golf Pad app and open Preferences, then select Golf Pad LINK / TAGS
Enable 'Golf Pad LINK / TAGS' and select 'Scan TAGS with your phone'
Within the same screen, tap on "Assign club for a tag" and touch the tag against the top of the phone (this is where the antenna is located).
Select the club from the list. Repeat for all clubs.
You are all set, you can now start a round! See this page for instructions on how to use TAGS and Smart Lock during a round.