Golf Pad Click: Battery and Troubleshooting

Modified on Mon, 26 Oct at 4:20 PM

Checking the battery


During a round, the Click status button in the toolbar turns yellow when the battery is low, and the app shows a Low battery badge.

Battery status can read Low (20% or less) or Critical (10% or less). When you see either, plan to replace the battery soon so the Click keeps working on the course.

To see the exact battery level, open Preferences > Golf Pad Click, tap the menu (…) on your Click's card and check Battery in Device details.


The battery and how long it lasts


Golf Pad Click runs on a single CR2032 coin cell, a common 3V lithium button battery you can find at most stores. On a fresh battery, Click lasts about 1 to 2 years of normal use before it needs replacing.


Replacing the battery


When the battery finally runs low, swapping it takes a minute:


1. Prepare a new CR2032 battery

2. Open the compartment by locating the small notch on the side edge, prying the case open with a flathead screwdriver, coin or spudger, and gently releasing the internal plastic clips around the seam

3. Remove the old battery and insert the new CR2032 with the + (positive) side facing up

4. Snap the cover back together firmly and check the connection in Preferences > Golf Pad Click


Connection problems


If the status button is red, the Click is disconnected or there's an error. Try the following:

  • Bluetooth is disabled: turn Bluetooth back on.
  • Bluetooth permission denied or Location permission denied: tap Grant, or Go to settings to enable the permission for Golf Pad.
  • Keep the Click close to your phone.
  • Press the Click button to wake it and let it reconnect.
  • Keep the Golf Pad app running during your round. If the app sits in the background for a while, Golf Pad disconnects Click to save battery and reconnects when you're back.
  • Android: set battery usage for Golf Pad to Unrestricted so the app can stay connected in the background.
  • iPhone: turn off Low Power Mode during your round.


Forgetting and re-pairing a device


If the Click still won't connect, you can remove it and pair again: open Preferences > Golf Pad Click, tap the menu (…) on your Click's card, tap Forget device, then follow the pairing steps to set it up fresh.


Still stuck? Contact Golf Pad support and we'll help.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article